Code: RSPSW10
Pewag RSPSW Grade 10 Ratchet Load Binder with lockable hooks in accordance with EN 12195-2
This load binder for two-part lashing chain systems in accordance with EN 12195‑3 is intended for the ZKW lashing chain – the two are always used in conjunction.The PSW shortening hook with safety catch is already assembled. Depending on the selected lever length (always take the STF value into account!), all sizes are also suitable for frictional lashing.The lashing capacity is 25 % higher than for grade 8. As specified in the full operating manual, this load binder is not suitable for lifting or attaching loads. Thanks to the pre-mounted shortening hook, the RSPSW load binder may be positioned anywhere in the ZKW lashing chain.1. What is a ratchet load binder used for?
A ratchet load binder is used to tighten chains when securing heavy loads on trucks, trailers, or during transport.
2. How does a ratchet load binder differ from a lever binder?
A ratchet binder uses a ratcheting handle for gradual tightening with more control and less effort, while a lever binder relies on a snap action that requires more force and carries higher risk of kickback.
3. What size chain can I use with a ratchet load binder?
It depends on the binder model. Each binder is designed to fit specific chain sizes and grades, such as Grade 8 or Grade 10. Always check the product specifications before use.
4. Is a ratchet load binder safer than a lever binder?
Yes, ratchet binders are considered safer as they reduce the risk of sudden release and allow more controlled tensioning.
5. How do I maintain a ratchet load binder?
Keep the binder clean and free of dirt, lubricate the moving parts regularly, and inspect for wear or damage before each use. Replace immediately if any defects are found.
| Code | Thickness of Webbing | Stock | Price | |
|---|---|---|---|---|
*Some products may require a longer delivery time